How to build a Cow Shed with Natural Materials


cow shed door made of areca nut

How to build a Cow Shed with Natural Materials

Building a small structure is not a difficult task if you are from rural area or if you have some trees, mud and some natural materials around.

It is ideal that cows don’t sleep on cement flooring. Chances are very high they will develop issues with their legs. Most of the cows nowadays sleep on rubber mats.

  • areca nut wood door
  • cow shed mud floor
  • cow shed door made of areca nut
  • areca nut planks doors
  • Cow shelter
  • Cow shed natural material
  • cow shelter with mud floor

Identify the soil and amend it properly if the soil doesn’t stay intact. If not sure you can check for tips from one of my friend’s natural building blog www.thannal.com

How to build a strong floor that will withstand cows Hooves.

  • Make sure the floor is at least half a meter raised above the ground.
  • The front area needs to be slightly raised and sloping by an inch in height towards rear. Cows urinate frequently. It is important that the floor is neither soggy nor slippery.
  • Now make 1.5 feet deep pits on all four corners of the floor and two in the center length wise. The circumference of the pit will depend on the girth of the logs being used as pillars.
  • Now once you raise the floor, mix some tree sap (Kulamavu or kulirmavu is used mostly in Kerala) and make sure to hammer it down really hard with a wide faced hammer. Floor needs to harden well.
  • Create small cavities near the wall on all the three areas of the cow except for the face or feeding area. So the urine passes away easily.
  • You can split bamboo or arecanut tree for constructing the walls. Coir rope is also ideal for tying which will last for more than a year. If the rope weakens or deteriorates with time you may tie more over it. Raise the walls to at least 4 feet high in order to keep dogs, foxes and other small feral animals and pests away. Tie in diamond pattern like an x shape to keep the rope and structure in place. Lesser the gap between the walls the safer the cows.
  • Center poles will help you to make sloped ceiling and also make a small door for the entrance area.
  • Raise a wall at the face of the shed and leave the rear area for entrance.
  • Making a door is simple as shown in the below pictures. Use the same x pattern and use arecanut or bamboo. Light weight yet very robust and sturdy. Make loose but removable knots on one side of the door which is to the rear side pole, so the door moves in front and back direction, keep a coconut shell down on the pole so it is easy to move the door. Once the cows are inside move the door towards the center pole and tied it with the rope.
  • Try to get a center pole which has a v shape. This is very essential since it will determine the strength of the roof. Now you need another pole at the center of the roof. If you are not confident then nail the poles with steel nails and tie with coir x pattern. You can also use steel cable of low gauge.
  • Two more poles on the front and rear are required to hold the roof. Again use nails to give strength and then keep trying coir rope in x patterns.
  • Keep few wooden rafters if available which will give strength to the structure. Bamboo rafters are good and light in weight. Then use coconut leaves to weave a thatched roof. I will post on weaving a coconut leaf later.
  • Plastic sheets are cheap and durable compared to coconut leaves, if you don’t have the time. However it will be unbearable for the cow during the day time because of the trapped heat and humidity. Workaround is to add few coconuts leaf under and over the plastic sheets. Tied two tips of the coconut leaf making it into like bird wings. Then place it on the roof and push it to the other end with a long pole and keep doing it till the time the plastic is hidden.

6 Replies to “How to build a Cow Shed with Natural Materials”

Comments are closed.

UPI & other payment options

Products